TECHNICAL SPECIFICATIONS FOR MEDICAL GAS PENDANT FOR OPERATING ROOMS:

TECHNICAL SPECIFICATIONS FOR MEDICAL GAS PENDANT FOR OPERATING ROOMS:

ANESTHESIA PENDANT:

Movable pendant arm which we call as anesthesia pendant should have the following features.
The movable pendant arm should be moved approximately 600 mm with the electric motor and parked at the desired point.
Moving pendant arm 90 kg. It should be capable of bearing weight.
The movable pendant arm should be able to rotate 340 ° around its axis.
Movable Pendant The arm must be terminated on the suspended ceiling with a square steel flange to the ceiling and with adapters that can be connected to each gas separately with a defined NIST connection system.
Medical Gases and Vacuum Systems brought with Copper Tubes must be connected to Medical Gas Outlets with special hoses for AntiStatik, Oxygen and Medical Gas Services which are produced according to EN 739: 1998 norm, whose name is written permanently, the ends of which are pressed with NIST connection.
-Moving Pendant Arm ceiling connection shall be closed on the suspended ceiling with a cover painted RAL 9002 color.

Anesthesia pendant should be equipped with a double tray console. The console should have 2 trays of 500x470x25 mm with a height of 650 mm and 30x10 mm stainless steel hanger rails on the sides. Console side post profiles should be round radius and have channels for connecting the device
The console must have the following services.
2 pcs. Oxygen outlet,
1 name. Nitrogenprotoxide outlet,
1 name. Medical air 4 bar socket, BS
2 pcs Medical Vacuum Outlet,
1 pcs Anesthesia Gas waste outlet,
2 pieces of Electrical Module Boxes
8 pcs grounded electrical socket, Electrical Module Boxes Plastic injection molded and painted over.
1 pcs AGSS pump start switch
2 device hanging rails on the sides

The operating room pendant will be RAL 9002 electrostatic powder painted.

The product must be CE certified according to the European Medical Devices directive 93/42 / EEC.

Manufacturer and Founder Company must have IS9001 and EN 46001 Quality certificate.

SURGICAL PENDANT:

The movable pendant arm, which we call surgical pendant, should have the following characteristics.
The movable pendant arm should be moved approximately 600 mm with the electric motor and parked at the desired point.
Moving pendant arm 90 kg. It should be capable of bearing weight.
The movable pendant arm should be able to rotate 340 ° around its axis.
Movable Pendant The arm must be terminated on the suspended ceiling with a square steel flange to the ceiling and with adapters that can be connected to each gas separately with a defined NIST connection system.
Medical Gases and Vacuum Systems brought with Copper Tubes must be connected to Medical Gas Outlets with special hoses for AntiStatik, Oxygen and Medical Gas Services which are produced according to EN 739: 1998 norm, whose name is written permanently, the ends of which are pressed with NIST connection.
The movable Pendant Arm ceiling connection shall be closed on the suspended ceiling with a cover painted RAL 9002 color.

Surgical pendant must be equipped with a double tray console. The console must have two 650 mm high and 500x470x25 mm trays and 30x10 mm stainless steel hanger rails. Console side post profiles should be round radius and have channels for connecting the device
The console must have the following services.
2 pcs. Oxygen outlet,
1 name. Nitrogenprotoxide outlet,
1 name. Medical air 4 bar socket, BS
2 pcs Medical Vacuum Outlet,
1 pcs Anesthesia Gas waste outlet,
2 pieces of Electrical Module Boxes
8 pcs grounded electrical socket, Electrical Module Boxes Plastic injection molded and painted over.
1 pcs AGSS pump start switch
2 device hanging rails on the sides

The operating room pendant will be RAL 9002 electrostatic powder painted.

The product must be CE certified according to the European Medical Devices directive 93/42 / EEC.

Manufacturer and Founder Company must have IS9001 and EN 46001 Quality certificate.